Thursday, 24 October 2013

Post 34- Research into a film magazine

As part of my research, I have looked into the typical conventions which would be seen in a film magazine. http://www.slideshare.net/KirstyW94/codes-and-conventions-of-film-magazines

  1. The Masthead- the type of masthead in a film magazine will reflect the magazine's audience. It's usually placed in the top-left corner and is the largest text of the magazine. For example, in 'Little white lies' magazine the type of masthead used reflects a arty and independent film magazine, which it is.
  2. Image- The image which is used on the front cover of the magazine will again reflect the audience of the magazine. It will most likely be a mid-shot image and will feature a main film they have reviewed and that will appear most to their audience.
  3. Fonts- There will be a range of fonts that are used within the magazine. This is used to engage the audience more. Depending on the magazine itself, and more 'intellectual' film magazine which contains thorough information will have a lot of small font. Whilst a film such as 'Empire' will have bigger fonts. 

Analysing different film magazines

Below I have annotated two different film magazines, there are both similar and different attributes which I have explained further.

Empire is a British Film magazine which is published monthly by Bauer consumer media. They review both mainstream and art films.

Below is my analysis of an article in Empire:





















Little White Lies is a bi-monthly, British independent movie magazine.

 

Below is my analysis of a film review from 'Little white Lies':


Post 33- Final Poster





Post 32- Poster feedback using Tumblr



In order to gain feedback from different perspectives, I have decided to gain feedback from both a social network platform and from my peers. Gaining more than one type of feedback will enable me to have different kinds of opinions of my film poster. I understand that gaining feedback from my peers can not be so effective. They may not express their full opinions of my product due to the relationship type. However, asking anonymous people on social networks will open less bias and more honest views of my film poster. Firstly, I put my final film poster on the social blog website 'Tumblr'. This audience is around 17+ and so is the perfect range of people to ask. Below I have showed the stages it took to gain the feedback using this website. I managed to gain one piece of useful feedback from a follower on my blog in a short space of time.


This image shows the first stage of gaining feedback. Tumblr allowed me to put a caption to let my blog followers know why I am posting this. I have found that using Tumblr allowed my poster to be viewed to a large amount of people, 96 people, unlike questionnaires.




This shows the feedback when it has been posted. Unfortunately, Tumblr would not let the audience comment below  the post, they had to send a message to my inbox instead which is not so noticeable.
Above shows the feedback received. They had to use the message feature instead of commenting under the poster.
What I have learned from my poster feedback using Tumblr:

  1. Overall, the audience thought that the film poster looked professional. This was especially indicated by the small print writing at the bottom which is conventional of all film posters. This included the production company and cast and crew too. 
  2. The tagline below the title seemed appealing to the audience too. It was effective because the writing had the effect of looking like it is fading away. This is a hidden message of showing how the memories fade away too, relating to the themes in the film.
  3. I have found that the picture needed a little more editing so it's more effective. I edited it so it is a little brighter so it corresponds well with the white background. The image is the first thing the audience will see and so editing it more to suit my film would be effective at showing the audience what the film is about. So overall, the text in the poster is more effective than the image, especially the small print of extra information which is very conventional of film posters.

Post 31- Poster designs

From researching what the typical conventions are from a film poster, I could start planning my film's poster. I decided to do a few drafts before deciding which poster design would be most suitable for our film. I wanted to make sure that the poster conveyed the correct emotions and concepts, so because of this, I attempted to show the mystery genre through the poster. This meant the poster needed to be simple to not give too much away about the film, and at the same time have it detailed enough so the audience know what the basic themes are. Below are some ideas I have drawn to show this:

(Insert drawings)

 

The First Draft

From my illustrations, I decided that I would choose one which I could develop into a potential film poster, and I used the editing software 'Adobe Photoshop' to do this. As this is only the first draft, I took a screenshot of a camera still when I was editing my actual film. This was much easier than taking an individual photo. I chose this still specifically due to it having enough space around the main image for the title, subheading and any extra texts such as the cast or crew.
















Of course as it's a first draft, the editing is fairly basic as I mainly wanted to test ideas for the final poster. I used the 'Grayscale' effect firstly to give the impression of memories. Sometimes, when we think of the past we think of black and white photographs and so I wanted to show through the poster that the film is about past memories which inevitably we are going to forget at some point in our lives. I believe this way it does not give too much away but yet it is effective. Using the 'brightness and contrast' tool, I lightened the photo a little to make it more visible and show Thomas a little exposed with the brightness of his face. This shows how he is very important in the film and perhaps how he was 'exposed' to other people's memories.



Post 30- Annotate a poster

Firstly, I decided to look at a standard theatrical poster from 'The Hunger Games'.

CLICK HERE TO SEE THE ANNOTATION MORE CLEARLY



Post 29- Film posters

A film poster is used to advertise a film.  The studios usually use more than one poster that is different in size to be used for varied markets. Larger posters may be used in shopping centres and at the cinema itself. A film poster will usually have an iconic image on it, as well as text too. The text will usually include the main actors and actresses or a key phrase or quote related to the film.

The main conventions of a film poster are...

  1. The title of the film- the font size, colour and placement is all significantly important and a lot goes into the thought process of this. After all,  the idea of a poster is for the viewer to remember it. The way this is presented also suggests the genre of the film, so it's important to get it right.
  2. The key iconic image of the film- this will usually be placed in the centre of the poster, with it's size taking up most of the page. It will be in the centre as this is where our eye line generally tends to follow.
  3. A tagline- usually a catchy slogan which gives a clue to the viewer of what genre the film is and the common themes it will have.
  4.  Lead actors/actresses - These will usually appear in small print at the bottom of the poster. If the viewer of the poster has an interest with a particular cast member shown on the poster, they are more likely to go and see the film.

It's also important to acknowledge, however, that there is more than one type of film poster. Sometimes, a filmmakers will distribute a teaser poster with just an iconic poster, and then a few months later they will distribute the main poster. This all adds to creating a 'hype' around the film. Not all films will have every poster down below, but at least one of them.

Character poster

 As you can see from the image on the left, the character poster chooses a specific character from the film (usually a main character). They are mainly used for the audience to identify the actor/actress playing that character. If the viewer audience identify with the actor/actress and have an interest in them, they are more likely to watch the film.

A teaser poster

 

This poster will not show too much of what the film is about and will usually be the first poster released to inform the audience about the film and to leave them wanting to know more about it. It will most likely contain the title, a main actor/actress and the release date (usually a year rather than a specific date). It may also have a tagline too, this will keep the audience intrigued and guessing about the film.

Theatrical poster 

 

This poster will be the main poster and the large majority of films will have at least this to promote their film. This type of poster usually is the last to be released before the actual film is. It provides more textual information of the film, this is the type of information the audience has been waiting for throughout the different types of posters. 


Post 28- Pre-production- Shooting schedule

Unlike the shot list, the shooting schedule is made to adjust to the time we want or need to film each scene. So, at this time of year we are limited with the amount of light so we needed to think carefully prior to making the shooting schedule about what scenes of the film need the most amounf of light. For example, Scene 2 which is in the kitchen, needs a sufficient amount of lighting due to it being a morning setting where Thomas has just woken up. On the other hand, the last scene does not need much natural lighting as it's inside a bridge and needs the 'mysterious' effect that the darkness shows. Consequently, we will be filming this scene at the end.